HÅG Creed 6002
HÅG Creed 6002
Taxes included (EU).
Impossibile caricare la disponibilità di ritiro
HÅG Creed 6002 · Low back · Fully upholstered
Smaller, lighter, and not a lesser chair.
At a glance
The lightest Creed, and the smallest in the room
Nothing structural is missing. The 6002 has the same seat, the same base, the same inBalance® mechanism and the same ten-year warranty as the 6056 that costs half as much again. What it has less of is backrest — 455 mm, ending just above the shoulder blades — and, because of that, 5.5 kg less chair to move around.
- Seat height
- 40–55 cm
- Seat depth
- 39–49 cm
- Seat width
- 440 mm
- Base
- Ø730 mm aluminium
- Tilt
- 15° forward / 16° back
- Max. user weight
- 110 kg
- Upholstery
- Full, front and back
- Standard
- EN 1335 Type A
Everything here except the upholstery is shared with every other Creed — the backrest height and the weight above are what change. Built to order in Røros, Norway, with a 10-year warranty.
The range
All six Creed models
One chassis, six backrests. Seat, base, mechanism, fabrics and almost every option are shared — the backrest height and how it is covered are the whole difference. The 6002 is the bottom of the range.
-

Low back · fully upholstered
Creed 6002455 mm · 13.5 kg
-

Medium back · partly upholstered
Creed 6003475 mm · 16.5 kg
-

Medium back · fully upholstered
Creed 6004510 mm · 17 kg
-

High back · partly upholstered
Creed 6005555 mm · 18.5 kg
-

High back · fully upholstered
Creed 6006585 mm · 19 kg
-

High back · comfort layer
Creed 6056590 mm · 19.5 kg
The decision
Is the 6002 the right Creed for you?
This is a choice about two things and nothing else: how much backrest you want behind you, and whether you will ever want a headrest. Get those right and the rest of the range is interchangeable.
Choose the 6002
- The desk is small, or the room is, and a tall backrest would dominate it
- You are certain you do not want a headrest
- The chair gets moved — between rooms, floors, or homes
- You want the back covered on both sides at the lowest weight in the range
- You need an ESD chair for electronics or lab work
This page →
Consider the 6003
- 20 mm more back — 475 mm against 455 mm
- Partly upholstered: the outer back shell stays exposed
- 3 kg heavier, and the cheapest Creed in the common fabric groups
- A headrest can be fitted, now or later
- No SHORT seat and no ESD version
Consider the 6004
- 55 mm more back, reaching the shoulder blades rather than stopping below them
- Fully upholstered too, and a headrest can be added later
- Also offered with the SHORT seat and as an ESD chair
- 3.5 kg heavier — the one to pick for a desk nobody moves
- The model most offices order by default
Above these sit the 6005 (high back, partly upholstered), the 6006 (high back, fully upholstered) and the 6056 (high back with an extra comfort layer and a wider seat). Every fabric and base finish is available on every model; the headrest is the one option the 6002 does not take.
The same chair, in quantity
A room full of these weighs 40 kilos less.
How it works
A small chair that still moves
HÅG inBalance® — the backrest is not the point
Most chairs ask the backrest to do the work, which is why a short one feels like a compromise. A Creed does not: the pivot sits under the middle of the seat, so the 15° forward and 16° backward tilt happens around you, and your legs stay involved in holding you up. That mechanism is identical on all six models. A 455 mm back is less to lean on, not less support.
One wheel instead of five levers
Seat depth, backrest height and both tilt resistances come off a single wheel within reach of the seated hand, each still adjustable on its own. It matters more on this model than the others: the 6002 is the Creed that gets carried to another desk, and it can be reset for whoever sits in it next in under a minute.
HÅG SwingBack® armrests
An option on the standard height- and width-adjustable armrests: they swing back behind the backrest. On a 120 cm desk that is the difference between a chair that tucks away and one that sits in the walkway.
No headrest — and that is not an oversight
The 6002 is the only Creed with no headrest option. It cannot be added at order time and it cannot be retrofitted later: a 455 mm backrest ends below the point where a headrest would have anything to mount to. If a headrest matters to you, or might in two years, the 6004 is the smallest Creed that takes one. Worth knowing alongside it: on the ESD version of the 6002, armrests are not available either, and the chair arrives fully assembled rather than flat-packed.
Materials
The cheapest Creed to order in leather
The 6002 is upholstered front and back like the 6004 and the 6006, but across a smaller backrest — so it carries less fabric than any other model in the range. The practical effect is that the step from a group-1 wool to a group-7 leather costs less on this chair than on any other Creed. If you were ever going to order leather, this is the model to order it on.
- Groups 1–2 — recycled polyesters and New Zealand wools: Xtreme, Cura Loop, Select. What most offices order, and where the Quick-Ship colours live.
- Groups 3–4 — texture and depth: tweedy Capture, Norwegian Sirdal, Steelcut.
- Groups 6–7 — chrome-free semi-aniline leathers: Paloma Soft, Elmosoft.
- Wipeable — PUxx 1 and Illusion 3.0 are polyurethane-coated and can be disinfected; five-year fabric warranty rather than ten.
Every price in the configurator above updates live as you change the covering, and every cover on the chair can be replaced years later. See the full fabric overview before you decide.
Front and back, shown in Capture Light beige on a white base. The outer shell carries the same fabric as the seat — on a chair this size, the back is the side most people in the room actually see.
Configuration
What to decide at order time
Most of this can be changed later. Three things cannot, comfortably: the gas lift, the foot ring and the ESD version.
| Option | Worth knowing |
|---|---|
| Headrest | Not available on the 6002, at order time or afterwards. The 6004 is the smallest Creed that takes one. |
| Armrests, height- and width-adjustable | The standard armrest, in black or silver. HÅG SwingBack® is ordered as an addition to it. Not available on the ESD version. |
| 3D arm pads | Add depth adjustment and rotation to the pad. Worth it where one chair is shared between people of different builds. |
| SHORT seat | A fixed 40 cm seat depth instead of the 39–49 cm range, at no extra cost. Offered on the 6002, 6004 and 6006 only. Worth it if the seat edge presses behind your knees. |
| ESD version | Decide now. A separate article, not an accessory: it arrives assembled and takes neither armrests nor a headrest. |
| Gas lift, 200 / 265 mm | Decide now. The standard 150 mm lift gives 40–55 cm; 200 mm gives 47.5–66 cm for high or sit-stand desks; 265 mm is counter height. Changing it later is a service job. |
| HÅG FootRing, Ø450 mm | Only orderable together with the 200 or 265 mm lift — it cannot be added to a chair on the standard lift. |
| Base finish | Ø730 mm aluminium in black, silver, white, Blush Rose, Moss Grey or polished. |
| Castors, Ø65 mm | Hard braked castors for soft floors are standard. Universal castors suit both floor types; all five must match. |
| HÅG StepUp / QuickStep | Footrests for higher desks. StepUp has three levels and fits every gas lift; QuickStep is the rocking one. |
Replacement covers and accessories are in spare parts; the 6002 backrest cover is part 108030 and the seat cover 108029, shared with the 6003, 6004 and 6005.
In use
Watch it being adjusted
The 4-in-1 wheel, seat depth, tilt resistance, forward tilt and the armrests — demonstrated by Flokk, in about three minutes. Every setting shown applies to the 6002; only the headrest sequence does not.
Technical
Dimensions
| Backrest cushion height | 455 mm |
|---|---|
| Seat height | 40–55 cm (150 mm gas lift) |
| Seat depth | 39–49 cm, or SHORT 40 cm |
| Seat width | 440 mm |
| Base | Ø730 mm, five-star aluminium |
| Tilt | 15° forward / 16° back, three lock positions |
| Weight | 13.5 kg, excluding armrests |
| Maximum user weight | 110 kg |
| Upholstery | Full, front and back |
| Backrest cover part | 108030 |
| Seat cover part | 108029 |
Standards and certification
- EN 1335 Type A — the European dimensional and safety standard for office chairs, with the 150 mm gas lift.
- Class Ax is the 6006 only. If a tender asks for it by name, the 6002 cannot be specified to meet it — the 6006 with the SHORT seat and 3D arm pads can.
- NPR 1813-2016 — the Dutch practice guideline Dutch employers and health-and-safety services ask about.
- GS mark (Geprüfte Sicherheit), tested by LGA / Intertek in Germany.
- GREENGUARD Gold, Möbelfakta and the EU Ecolabel — indoor emissions, furniture quality and environmental performance. Ecolabel scope depends on configuration and fabric; ask us if you need it for a tender.
Environment
The Creed has an independently verified Environmental Product Declaration: 43.32 kg CO₂e per chair, 38.15 % recycled content by weight and 676.33 MJ of life-cycle energy. Those figures are measured on the 6004; no separate declaration is published for the 6002. Every Creed is made in Røros, Norway, in an ISO 14001 and ISO 9001 plant, comes apart without special tools, and every cover can be replaced — a chair reupholstered twice beats a chair replaced once by a wide margin.
Lead times
Nothing sits in a warehouse: each 6002 is upholstered to your order in Norway, so the fabric decides the wait.
- HÅG Quick-Ship — 15 working days. The 6002 is in the programme, in selected Xtreme, Select and Paloma colours.
- Standard collection — 20–25 working days.
- Extended collection — 35 working days or more, depending on mill availability.
Indicative dispatch times from the factory; transport time comes on top. Ordering twenty or more? Tell us the date you need them and we will confirm before you commit.
Warranty
- 10 years on the chair and accessories, in normal use up to nine hours a day.
- 5 years above nine hours a day, and 5 years in 24/7 shift use with a fabric from the approved list.
- 10 years on standard-collection fabrics and leathers, except polyurethane-coated ones (five years).
Covers parts against material and manufacturing defects; labour and travel are chargeable. Full terms on the warranty page. The chair arrives flat-packed — the ESD version excepted — and goes together in a few minutes; see the assembly instructions. For larger quantities or a specification outside the configurator, ask us for a quote, or see business clients.
Documents
Downloads
Questions
HÅG Creed 6002 — frequently asked
Can I add a headrest to the 6002?
No — not at order time and not later. The 6002 is the only Creed with no headrest option at all; its 455 mm backrest ends below the point where one would mount. The 6004 is the smallest Creed that takes a headrest, and it is retrofittable there.
Is a 455 mm backrest enough?
What is the difference between the 6002 and the 6003?
The 6003's back is 20 mm taller and partly upholstered — its outer shell is left exposed rather than covered in fabric — and it takes a headrest, which the 6002 does not. The 6002 is 3 kg lighter, and it is the only one of the two offered with the SHORT seat or as an ESD chair. Seat, base, mechanism and warranty are identical.
Is the 6002 a cheaper chair or just a smaller one?
Smaller. It uses the same seat, the same five-star aluminium base, the same HÅG inBalance® mechanism, the same castors and the same ten-year warranty as every other Creed, and it is built on the same line in Røros. The only thing that is less of it is the backrest.
What is the ESD version, and do I need one?
An ESD chair is electrically bonded so static discharges through the castors instead of through whatever you are holding. You need one for electronics assembly, repair benches and cleanrooms, and nowhere else. The 6002 and the 6004 are the only Creeds offered that way. It ships fully assembled and takes neither armrests nor a headrest, so say so when you order — it is a different article, not an accessory.
Which gas lift should I order?
The standard 150 mm lift for an ordinary desk — it gives a seat height of 40–55 cm, which suits desks from roughly 68 to 80 cm. The 200 mm lift (47.5–66 cm) for high or sit-stand desks used seated at their upper setting. The 265 mm lift for counter-height work, best ordered with glides and a HÅG FootRing. The lift is awkward to change afterwards, so decide at order time.
Does the 6002 come assembled?
No — it arrives flat-packed and goes together in a few minutes without tools beyond what is in the box. At 13.5 kg it is also the easiest Creed to carry up a staircase. The ESD version is the exception: it ships fully assembled.
Can the 6002 be certified to EN 1335 class Ax?
No. The 6002 is EN 1335 Type A. Class Ax is reachable on the 6006 only, and only when it is ordered with the SHORT seat and 3D arm pads together. If a tender names class Ax, specify the 6006.

