What is the difference between the HÅG Tribute 9021 and 9031?

The headrest. The 9031 adds an adjustable headrest that moves forward with you as you recline, and can take a coat hanger behind it. Seat, back, mechanism, armrests and base are the same.

Can I add a headrest to the 9021 later?

No — Flokk does not support fitting the headrest to a 9021 afterwards. If you might want one, order the 9031 from the start.

Is the Tribute available in leather?

Yes. The configurator offers Paloma Soft (Wollsdorf) in six colours and Elmosoft (Elmo) in three. On a leather chair the armrest tops can be in the same leather at no extra cost.

Which gas lift should I choose?

The standard 150 mm lift gives a seat height of 38.7–52.5 cm and suits an ordinary desk. The 200 mm lift raises the seat for taller users or higher desks. It is a service job to change later, so decide when you order.

What is the maximum user weight?

110 kg unless otherwise stated — the basis of EN 1335, the European office-chair standard.

Does the Tribute come assembled?

It arrives flat-packed and goes together in a few minutes. If you order several, ask us about assembly on delivery.

HÅG Tribute or HÅG SoFi?

Both use HÅG inBalance®. The SoFi is a lighter, more compact task chair at a lower price; the Tribute is the executive chair — a taller, more heavily padded back, TiltDown™ armrests with leather tops and an all-aluminium frame.

Who designed the HÅG Tribute?

Svein Asbjørnsen and his studio sapDesign® in Sykkylven, Norway. The chair is made by Flokk in Røros, Norway.

1 4

HÅG Tribute 9021 - SC61186 Chestnut / Armrest Leather / Black / 150 mm / Wheels for soft floors

€2.211

~~€2.827~~ €2.211

Save €616 Sold out

Taxes included (EU).

SKU:ID CODE: 5271

The HÅG Tribute 9021 is the executive chair in its purest form: a high, S-curved back with an extra comfort layer, HÅG inBalance® movement, built-in lumbar support and HÅG TiltDown™ armrests with leather tops. No headrest, the back itself reaches the shoulders.

At a glance

The Tribute without the headrest

Everything that makes a Tribute is here: the high padded back, the inBalance® mechanism, the TiltDown™ arms. What the 9021 leaves out is the headrest, which gives it a calmer, more architectural silhouette.

455mm

Seat width, with adjustable seat depth

Ø740mm

Five-star aluminium base with footplates

Tilt lock positions, with tension set for your weight

10years

Warranty on the chair and accessories

Seat height 38.7–52.5 cm on the standard 150 mm gas lift, seat width 455 mm with adjustable depth, five-star aluminium base Ø740 mm with sloping footplates, tilt tension adjustable forwards and backwards and lockable in three positions, HÅG TiltDown™ armrests (black leather top) adjustable in height and width.

How it works

Built to keep you moving, even in an executive chair

HÅG inBalance® - the chair moves with you

The seat and back tilt around a pivot near the middle of the seat, so the chair follows you forwards when you lean into the desk and backwards when you sit back to think. You set the resistance for your weight in both directions, and you can lock it in three positions when you want it still.

An S-curved back with an active upper part

The Tribute's back follows the natural S of the spine. As you recline, the upper part of the back moves forward to stay in contact with your shoulders, so the support does not fall away just when you lean back. The lumbar support is built into the back and adjusts to where your lower back actually is.

HÅG TiltDown™ armrests

Adjustable in height and width, and they tilt down out of the way, so you can pull the chair right up to the desk edge without the arms hitting it. The tops are black leather.

Close-up of the HÅG TiltDown armrest on a grey HÅG Tribute — The TiltDown™ armrest: adjustable in height and width, and it tilts down so the chair slides right up to the desk.

Fabric Material

Select (Gabriel) - group 2

In use

Watch it being adjusted

Flokk's own user guide for the HÅG executive chairs: seat height and depth, tilt tension and lock, lumbar support and the TiltDown armrests. For the bigger picture, Flokk also explains why to choose the HÅG Tribute.

User guide

Technical

Dimensions

Seat height	38.7–52.5 cm (150 mm gas lift)
Seat width	455 mm
Seat depth	Adjustable
Armrest height	178–285 mm above the seat
Width over the armrests	495–675 mm
Base	Ø740 mm, five-star aluminium
Tilt	inBalance®, tension adjustable forwards and backwards, three lock positions
Maximum user weight	110 kg (EN 1335 basis)
Back	High, S-curved, with extra comfort layer and integrated lumbar support

Standards and certification

EN 1335 Type B — the European office-chair standard, as listed for the Tribute in Flokk's 2026 price list.
ANSI/BIFMA — the North American office-furniture safety standard.
GREENGUARD Gold — low chemical emissions for indoor use (certificate in the downloads below).
Möbelfakta — the Swedish label for quality, environment and social responsibility.

Environment

Flokk publishes an independently verified Environmental Product Declaration for the Tribute: 84.41 kg CO₂e per chair, 45.90 % recycled content by weight and 1,258 MJ of life-cycle energy, measured on the 9031 with TiltDown armrests. The chair is made in Røros, Norway, in an ISO 14001 and ISO 9001 plant. Back, seat and headrest are replaceable as complete parts, so a worn cover never means a new chair.

Warranty

10 years on the chair and accessories, in normal use up to nine hours a day.
5 years above nine hours a day, and in 24/7 use with an approved covering.
10 years on standard-collection fabrics and leathers in normal use.

Covers parts against material and manufacturing defects; labour and travel are chargeable. Full terms on the warranty page. The chair arrives flat-packed with a short assembly.

Documents

Downloads

Environmental Product DeclarationPDF · Flokk · independently verified, valid to January 2029 GREENGUARD Gold certificatePDF · Flokk · low chemical emissions for indoor use Upholstery care guidePDF · Flokk · cleaning fabric and leather Gas lift maintenance guidePDF · Flokk · keeping the lift smooth CAD drawings — DWG 2DZIP · Flokk · for space planning BIM — RevitZIP · Flokk · Revit family for the whole range

More CAD formats (3DS, ArchiCAD, IFC, OBJ, pCon, SketchUp) are on request — ask us and we send the file.

Design

Svein Asbjørnsen - sapDesign®

The Tribute is drawn by Svein Asbjørnsen, whose studio sapDesign® sits between the fjord and the mountains in Sykkylven, a Norwegian town that has built furniture for generations. It is made by Flokk in Røros, the same factory that builds the HÅG Capisco, Creed and SoFi.