HÅG Creed 6056
HÅG Creed 6056
Taxes included (EU).
Impossible de charger la disponibilité du service de retrait
HÅG Creed 6056 · High back · Comfort layer
Built for the ninth hour.
At a glance
The top of the range, and the only one that is wider
The 6056 is the 6006 with more of everything soft: an additional comfort layer of foam through the seat and the backrest, the tallest back in the range at 590 mm, and a seat 10 mm wider than every other Creed. It is the model to specify when somebody is in the chair from eight until six, and the one to leave alone if they are not.
- Seat height
- 40–55 cm
- Seat depth
- 39–49 cm
- Seat width
- 450 mm
- Base
- Ø730 mm aluminium
- Tilt
- 15° forward / 16° back
- Max. user weight
- 110 kg
- Upholstery
- Full, over a comfort layer
- Standard
- EN 1335 Type A
Everything here except the seat width and the upholstery is shared with every other Creed — the backrest height and the weight above are what change. Built to order in Røros, Norway, with a 10-year warranty.
The range
All six Creed models
One chassis, six backrests. Seat, base, mechanism, fabrics and almost every option are shared — the backrest height and how it is covered are the whole difference. The 6056 sits at the top, and it is the one model that also changes the seat.
-
Low back · fully upholstered
Creed 6002455 mm · 13.5 kg
-
Medium back · partly upholstered
Creed 6003475 mm · 16.5 kg
-
Medium back · fully upholstered
Creed 6004510 mm · 17 kg
-
High back · partly upholstered
Creed 6005555 mm · 18.5 kg
-
High back · fully upholstered
Creed 6006585 mm · 19 kg
-
High back · comfort layer
Creed 6056590 mm · 19.5 kg
The decision
Is the 6056 the right Creed for you?
Against the 6006 directly below it, the 6056 buys you softer foam and a wider seat. It costs more, it is the heaviest, and it is the one model you cannot have in fifteen working days.
Choose the 6056
- Somebody sits in this chair all day, most days
- You want a wider seat — 450 mm against 440 mm everywhere else
- You want the softest seat and back HÅG builds on this chassis
- The chair faces into the room and has to look finished from behind
- Leather is on the table: this is the model it suits
This page →
Consider the 6006
- 5 mm shorter back, and the standard foam rather than the comfort layer
- Also fully upholstered front and back
- Lighter, cheaper, and in the Quick-Ship programme
- The only Creed that can be certified to EN 1335 class Ax
- Offered with the SHORT seat; the 6056 is not
Consider the 6005
- 555 mm back, partly upholstered — the outer shell stays bare
- A kilo lighter and much less expensive
- The high back for a floor of desks rather than one desk
- Standard 440 mm seat and standard foam
- In Quick-Ship, so it can be here in fifteen working days
Below these sit the 6004 (medium back, fully upholstered — the default choice), the 6003 (medium back, partly upholstered) and the 6002 (low back, the lightest). Every fabric and base finish is available on every model.
One chassis, six chairs
Put it at the head of the table and nothing clashes.
How it works
Soft is not the same as still
HÅG inBalance® — the reason extra foam works here
Soft seats are usually a trap: the more you sink in, the less you move, and the worse eight hours feel. A Creed is built the other way round. The pivot sits under the middle of the seat, so the 15° forward and 16° backward tilt happens around you and the chair keeps following small shifts of weight. The comfort layer on the 6056 adds padding without adding stillness — you get the softer landing and still finish the day having moved.
One wheel instead of five levers
Seat depth, backrest height and both tilt resistances come off a single wheel within reach of the seated hand, each still adjustable on its own. Worth ten minutes on day one: a chair this size set wrong is less comfortable than a smaller one set right.
HÅG SwingBack® armrests
An option on the standard height- and width-adjustable armrests: they swing back behind the backrest, so even the widest chair in the range tucks fully under the desk and you get in and out from the side.
Not in the Quick-Ship programme
This is the one real trade, and it catches people out. Every other Creed can be had in 15 working days in a selection of Xtreme, Select and Paloma colours. The 6056 cannot: it is built to order on the standard lead time, 20–25 working days for the standard collection and longer for the extended one. If you need chairs sooner than that, the 6006 is the closest equivalent — same full upholstery, 5 mm less back, standard foam, and it is in the programme.
Front and back, in Elmosoft Cognac on a polished aluminium base. The seam up the outer back is the 6056's tell — it is the only Creed whose backrest carries enough padding to need one.
Materials
The model where the covering counts most
More foam and a bigger backrest mean more fabric than any other Creed carries, so the covering moves the price further on this model than on any other in the range — and it is also the model most likely to be ordered in leather, which is where that gap is widest. Choose the fabric first; everything else is cheap by comparison.
- Groups 1–2 — recycled polyesters and New Zealand wools: Xtreme, Cura Loop, Select.
- Groups 3–4 — texture and depth: tweedy Capture, Norwegian Sirdal, Steelcut.
- Groups 6–7 — chrome-free semi-aniline leathers: Paloma Soft, Elmosoft. Over a comfort layer, these are what the 6056 was drawn for.
- Wipeable — PUxx 1 and Illusion 3.0 are polyurethane-coated and can be disinfected; five-year fabric warranty rather than ten.
Every price in the configurator above updates live as you change the covering, and every cover on the chair can be replaced years later. See the full fabric overview before you decide.
Configuration
What to decide at order time
Most of this can be changed later. Two things cannot, comfortably: the gas lift and the foot ring.
| Option | Worth knowing |
|---|---|
| Headrest | Black or silver, retrofittable later, and it shares its cover part with the HÅG Capisco. On the tallest back in the range it supports the neck rather than pushing the head forward. |
| Armrests, height- and width-adjustable | The standard armrest, in black or silver. HÅG SwingBack® is ordered as an addition to it. |
| 3D arm pads | Add depth adjustment and rotation to the pad. On a chair bought for one person all day, this is the option worth having. |
| SHORT seat | Not offered on the 6056. The fixed 40 cm seat is available on the 6002, 6004 and 6006 only. The 6056's seat is 450 mm wide with the standard 39–49 cm depth range. |
| Quick-Ship | Not available. The only Creed outside the 15-working-day programme — see the note above. |
| Gas lift, 200 / 265 mm | Decide now. The standard 150 mm lift gives 40–55 cm; 200 mm gives 47.5–66 cm for high or sit-stand desks; 265 mm is counter height. Changing it later is a service job. |
| HÅG FootRing, Ø450 mm | Only orderable together with the 200 or 265 mm lift — it cannot be added to a chair on the standard lift. |
| Base finish | Ø730 mm aluminium in black, silver, white, Blush Rose, Moss Grey or polished. Polished suits this model. |
| Castors, Ø65 mm | Hard braked castors for soft floors are standard. Universal castors suit both floor types; all five must match. |
| HÅG StepUp / QuickStep | Footrests for higher desks. StepUp has three levels and fits every gas lift; QuickStep is the rocking one. |
Replacement covers and accessories are in spare parts; the 6056 takes its own seat cover, part 108033, rather than the 108029 the other five share — the wider seat is a different pattern. Ask us for the backrest cover part before you order one.
In use
Watch it being adjusted
The 4-in-1 wheel, seat depth, tilt resistance, forward tilt and the armrests — demonstrated by Flokk, in about three minutes. Every setting shown applies to the 6056.
Technical
Dimensions
| Backrest cushion height | 590 mm |
|---|---|
| Seat height | 40–55 cm (150 mm gas lift) |
| Seat depth | 39–49 cm |
| Seat width | 450 mm |
| Base | Ø730 mm, five-star aluminium |
| Tilt | 15° forward / 16° back, three lock positions |
| Weight | 19.5 kg, excluding armrests |
| Maximum user weight | 110 kg |
| Upholstery | Full, front and back, over an extra comfort layer |
| Seat cover part | 108033 |
Standards and certification
- EN 1335 Type A — the European dimensional and safety standard for office chairs, with the 150 mm gas lift.
- Class Ax is the 6006 only. It needs the SHORT seat together with 3D arm pads, and the SHORT seat is not offered on the 6056. If a tender names class Ax, specify the 6006.
- NPR 1813-2016 — the Dutch practice guideline Dutch employers and health-and-safety services ask about.
- GS mark (Geprüfte Sicherheit), tested by LGA / Intertek in Germany.
- GREENGUARD Gold, Möbelfakta and the EU Ecolabel — indoor emissions, furniture quality and environmental performance. Ecolabel scope depends on configuration and fabric; ask us if you need it for a tender.
Environment
The Creed has an independently verified Environmental Product Declaration: 43.32 kg CO₂e per chair, 38.15 % recycled content by weight and 676.33 MJ of life-cycle energy. Those figures are measured on the 6004; no separate declaration is published for the 6056, which carries more material than any other model in the range. Every Creed is made in Røros, Norway, in an ISO 14001 and ISO 9001 plant, comes apart without special tools, and every cover can be replaced — a chair reupholstered twice beats a chair replaced once by a wide margin.
Lead times
Every 6056 is built and upholstered to your order in Norway, and this model is not in the Quick-Ship programme — so the fabric sets the wait from a higher floor than on the other five.
- Standard collection — 20–25 working days. The fastest the 6056 goes.
- Extended collection — 35 working days or more, depending on mill availability.
- Need it in 15? The 6006 in a Quick-Ship colour is the closest equivalent.
Indicative dispatch times from the factory; transport time comes on top. Ordering twenty or more? Tell us the date you need them and we will confirm before you commit.
Warranty
- 10 years on the chair and accessories, in normal use up to nine hours a day.
- 5 years above nine hours a day, and 5 years in 24/7 shift use with a fabric from the approved list.
- 10 years on standard-collection fabrics and leathers, except polyurethane-coated ones (five years).
Covers parts against material and manufacturing defects; labour and travel are chargeable. Full terms on the warranty page. The chair arrives flat-packed and goes together in a few minutes; see the assembly instructions. For larger quantities or a specification outside the configurator, ask us for a quote, or see business clients.
Documents
Downloads
Questions
HÅG Creed 6056 — frequently asked
What is the difference between the 6056 and the 6006?
Three things. The 6056 has an extra comfort layer of foam through the seat and backrest, a seat 10 mm wider at 450 mm, and 5 mm more backrest. Against that: it is a kilo heavier, it costs more in every fabric group, it takes no SHORT seat, it cannot be certified to class Ax, and it is not in the Quick-Ship programme. Same chassis, same mechanism, same warranty.
How long does a 6056 take to arrive?
20–25 working days for a standard-collection fabric, 35 or more for the extended collection. It is the only Creed outside the 15-working-day Quick-Ship programme, so there is no faster route on this model — if the date is fixed, the 6006 in a Quick-Ship colour is the closest equivalent.
Is the wider seat worth it?
Ten millimetres sounds like nothing and is not nothing over eight hours, particularly with the armrests set close. If the seat of a standard office chair feels like it ends too soon at the sides, this is the one model in the range that addresses it. If it does not, the 6006 gives you the same upholstery for less.
Does the extra padding make it worse to sit in all day?
It would on a static chair. On a Creed the pivot under the middle of the seat keeps the chair tilting with you rather than holding you in one position, so the comfort layer adds padding without encouraging you to stop moving. The foam is in addition to the mechanism, not instead of it.
Can I add a headrest to the 6056?
Yes — at order time or later. It comes in black or silver and shares its cover part with the HÅG Capisco. On the tallest backrest in the range it supports the neck properly rather than pushing the head forward.
Which gas lift should I order?
The standard 150 mm lift for an ordinary desk — it gives a seat height of 40–55 cm, which suits desks from roughly 68 to 80 cm. The 200 mm lift (47.5–66 cm) for high or sit-stand desks used seated at their upper setting. The 265 mm lift for counter-height work, best ordered with glides and a HÅG FootRing. The lift is awkward to change afterwards, so decide at order time.
Does the 6056 come assembled?
No — it arrives flat-packed and goes together in a few minutes without tools beyond what is in the box. At 19.5 kg it is the heaviest Creed, so it is worth unpacking it where it is going to live.
Can the 6056 be certified to EN 1335 class Ax?
No. The 6056 is EN 1335 Type A. Class Ax needs the SHORT seat together with 3D arm pads, and the SHORT seat is offered only on the 6002, 6004 and 6006 — so the 6006 is the only Creed that reaches it.
