HÅG Creed 6004
HÅG Creed 6004
Taxes included (EU).
Verfügbarkeit für Abholungen konnte nicht geladen werden
HÅG Creed 6004 · Medium back · Fully upholstered
The Creed most people mean.
At a glance
The middle of the range, in every sense
Of the six Creeds, this is the one that gets ordered by the dozen. The 510 mm back reaches the shoulder blades, the upholstery wraps front and back so the chair looks finished from the room side, and nothing about it needs explaining to the person who sits in it next.
- Seat height
- 40–55 cm
- Seat depth
- 39–49 cm
- Seat width
- 440 mm
- Base
- Ø730 mm aluminium
- Tilt
- 15° forward / 16° back
- Max. user weight
- 110 kg
- Upholstery
- Full, front and back
- Standard
- EN 1335 Type A
Everything here except the upholstery is shared with every other Creed — the backrest height and the weight above are what change. Built to order in Røros, Norway, with a 10-year warranty.
The range
All six Creed models
One chassis, six backrests. Seat, base, mechanism, options and fabrics are shared — the backrest height and how it is covered are the whole difference. The 6004 sits third from the bottom.
-

Low back · fully upholstered
Creed 6002455 mm · 13.5 kg
-

Medium back · partly upholstered
Creed 6003475 mm · 16.5 kg
-

Medium back · fully upholstered
Creed 6004510 mm · 17 kg
-

High back · partly upholstered
Creed 6005555 mm · 18.5 kg
-

High back · fully upholstered
Creed 6006585 mm · 19 kg
-

High back · comfort layer
Creed 6056590 mm · 19.5 kg
The decision
Is the 6004 the right Creed for you?
If you have no particular reason to choose otherwise, this is the one. The models either side of it exist for two specific reasons: a visible budget, or a taller back.
Choose the 6004
- You want a normal, excellent office chair and would rather not deliberate
- You are buying more than one and they have to match for years
- You want the back covered on both sides — it faces the room
- You want the option of adding a headrest later
- You need an ESD version for electronics or lab work
This page →
Consider the 6003
- 35 mm less back — 475 mm against 510 mm
- Partly upholstered: the outer back shell stays exposed
- The cheapest route into the range
- No SHORT seat and no ESD version
Consider the 6006
- 75 mm more back, carrying the shoulders rather than the shoulder blades
- The only Creed that can be certified to EN 1335 class Ax
- 2 kg heavier, and it reads as a bigger chair in a small room
- Same fabrics, same base, same mechanism
- The one to pick if you lean back to think
Also in the range: the 6002 (low back, the lightest, no headrest option), the 6005 (high back, partly upholstered) and the 6056 (high back with an extra comfort layer and a wider seat). Every fabric, base finish and option is available on every model.
Specify once, order again
One model, as many colours as the floor needs.
How it works
Built to be handed to the next person
HÅG inBalance® — the chair moves, so you do
The pivot sits under the middle of the seat instead of at its front edge, so the 15° forward and 16° backward tilt happens around you rather than tipping you. Shift your weight and the chair goes with it; the legs stay involved, the circulation keeps going, and nobody has to be taught a posture. Lock it in one of three positions if you would rather it stayed put.
One wheel instead of five levers
Seat depth, backrest height and both tilt resistances are set from a single wheel within reach of the seated hand — each still adjustable on its own. On a floor of identical 6004s this is the part that matters: a chair can be reassigned to a new colleague and set up correctly in under a minute, without a handover document.
HÅG SwingBack® armrests
An option on the standard height- and width-adjustable armrests: they swing back behind the backrest, so the chair pushes right under the desk edge, you get in and out sideways, and nothing collides when two desks are pushed together.
The ESD version
The 6004 is one of only two Creeds available as an ESD chair — the other is the 6002. Everything conductive is bonded so static drains through the castors instead of through the component you are holding: the chair is specified for electronics assembly, repair benches and cleanrooms. Two things change with it. An ESD chair arrives fully assembled rather than flat-packed, and no headrest can be fitted. Tell us at order time — it is a different article, not an accessory.
Materials
Pick the fabric before you pick anything else
The frame, the mechanism and the base are the same whichever 6004 you order. The covering is what sets the price, what you touch for eight hours, and how the chair looks in ten years — and because this model is upholstered front and back, there is nowhere for a cheap choice to hide.
- Groups 1–2 — recycled polyesters and New Zealand wools: Xtreme, Cura Loop, Select. What most offices order, and where the Quick-Ship colours live.
- Groups 3–4 — texture and depth: tweedy Capture, Norwegian Sirdal, Steelcut.
- Groups 6–7 — chrome-free semi-aniline leathers: Paloma Soft, Elmosoft.
- Wipeable — PUxx 1 and Illusion 3.0 are polyurethane-coated and can be disinfected; five-year fabric warranty rather than ten.
Every price in the configurator above updates live as you change the covering, and every cover on the chair can be replaced years later. See the full fabric overview before you decide.
Front and back, shown in Capture Dark grey on a polished aluminium base. The outer shell carries the same fabric as the seat — that single detail is the whole difference between the 6004 and the 6003 beneath it.
Configuration
What to decide at order time
Most of this can be changed later. Three things cannot, comfortably: the gas lift, the foot ring and the ESD version.
| Option | Worth knowing |
|---|---|
| Headrest | Black or silver, retrofittable later, and it shares its cover part with the HÅG Capisco. Not available on the ESD version. |
| Armrests, height- and width-adjustable | The standard armrest, in black or silver. HÅG SwingBack® is ordered as an addition to it. |
| 3D arm pads | Add depth adjustment and rotation to the pad. Worth it where one chair is shared between people of different builds. |
| SHORT seat | A fixed 40 cm seat depth instead of the 39–49 cm range, at no extra cost. Offered on the 6002, 6004 and 6006 only. Worth it if the seat edge presses behind your knees. |
| ESD version | Decide now. A separate article, not an accessory: it arrives assembled and takes no headrest. |
| Gas lift, 200 / 265 mm | Decide now. The standard 150 mm lift gives 40–55 cm; 200 mm gives 47.5–66 cm for high or sit-stand desks; 265 mm is counter height. Changing it later is a service job. |
| HÅG FootRing, Ø450 mm | Only orderable together with the 200 or 265 mm lift — it cannot be added to a chair on the standard lift. |
| Base finish | Ø730 mm aluminium in black, silver, white, Blush Rose, Moss Grey or polished. |
| Castors, Ø65 mm | Hard braked castors for soft floors are standard. Universal castors suit both floor types; all five must match. |
| HÅG StepUp / QuickStep | Footrests for higher desks. StepUp has three levels and fits every gas lift; QuickStep is the rocking one. |
Replacement covers and accessories are in spare parts; the 6004 backrest cover is part 108031 and the seat cover 108029, shared with the 6002, 6003 and 6005.
In use
Watch it being adjusted
The 4-in-1 wheel, seat depth, tilt resistance, forward tilt and the armrests — demonstrated by Flokk, in about three minutes. Every setting shown applies to the 6004.
Technical
Dimensions
| Backrest cushion height | 510 mm |
|---|---|
| Seat height | 40–55 cm (150 mm gas lift) |
| Seat depth | 39–49 cm, or SHORT 40 cm |
| Seat width | 440 mm |
| Base | Ø730 mm, five-star aluminium |
| Tilt | 15° forward / 16° back, three lock positions |
| Weight | 17 kg, excluding armrests |
| Maximum user weight | 110 kg |
| Upholstery | Full, front and back |
| Backrest cover part | 108031 |
| Seat cover part | 108029 |
Standards and certification
- EN 1335 Type A — the European dimensional and safety standard for office chairs, with the 150 mm gas lift.
- Class Ax is the 6006 only. If a tender asks for it by name, the 6004 cannot be specified to meet it — the 6006 with the SHORT seat and 3D arm pads can.
- NPR 1813-2016 — the Dutch practice guideline Dutch employers and health-and-safety services ask about.
- GS mark (Geprüfte Sicherheit), tested by LGA / Intertek in Germany.
- GREENGUARD Gold, Möbelfakta and the EU Ecolabel — indoor emissions, furniture quality and environmental performance. Ecolabel scope depends on configuration and fabric; ask us if you need it for a tender.
Environment
The Creed's independently verified Environmental Product Declaration is measured on this model, so the published figures are the 6004's own rather than a family average: 43.32 kg CO₂e per chair, 38.15 % recycled content by weight and 676.33 MJ of life-cycle energy. It is made in Røros, Norway, in an ISO 14001 and ISO 9001 plant, comes apart without special tools, and every cover can be replaced — a chair reupholstered twice beats a chair replaced once by a wide margin.
Lead times
Nothing sits in a warehouse: each 6004 is upholstered to your order in Norway, so the fabric decides the wait.
- HÅG Quick-Ship — 15 working days. The 6004 is in the programme, headrest included, in selected Xtreme, Select and Paloma colours.
- Standard collection — 20–25 working days.
- Extended collection — 35 working days or more, depending on mill availability.
Indicative dispatch times from the factory; transport time comes on top. Ordering twenty or more? Tell us the date you need them and we will confirm before you commit.
Warranty
- 10 years on the chair and accessories, in normal use up to nine hours a day.
- 5 years above nine hours a day, and 5 years in 24/7 shift use with a fabric from the approved list.
- 10 years on standard-collection fabrics and leathers, except polyurethane-coated ones (five years).
Covers parts against material and manufacturing defects; labour and travel are chargeable. Full terms on the warranty page. The chair arrives flat-packed — the ESD version excepted — and goes together in a few minutes; see the assembly instructions. For larger quantities or a specification outside the configurator, ask us for a quote, or see business clients.
Documents
Downloads
Questions
HÅG Creed 6004 — frequently asked
Which Creed should I order if I just want a good office chair?
This one. The 6004 is the middle of the range and the model most of our customers order: a 510 mm back that reaches the shoulder blades, upholstered front and back, every option available. Go up to the 6006 only if you want support at shoulder height, and down to the 6003 only if the budget is tight or the room is warm.
What is the difference between the 6004 and the 6003?
Two things. The 6004's back is 35 mm taller — 510 mm against 475 mm — and it is fully upholstered, so the outer shell is covered in the same fabric as the seat instead of left exposed. The 6003 is half a kilo lighter and costs less. Seat, base, mechanism and adjustments are identical.
Can I add a headrest to the 6004 later?
Yes, on the standard 6004. The headrest is a retrofittable option in black or silver, and it shares its cover part with the HÅG Capisco. The exception is the ESD version, which cannot take one — and the 6002 has no headrest option at all.
What is the ESD version of the 6004, and do I need one?
An ESD chair is electrically bonded so static discharges through the castors instead of through whatever you are holding. You need one for electronics assembly, repair benches and cleanrooms, and nowhere else. The 6004 and the 6002 are the only Creeds offered that way. It ships fully assembled and cannot take a headrest, so say so when you order — it is a different article, not an accessory.
Are the published environmental figures for the Creed measured on this model?
Yes. The Environmental Product Declaration for the HÅG Creed is calculated on the 6004: 43.32 kg CO₂e per chair, 38.15 % recycled content by weight and 676.33 MJ of life-cycle energy, independently verified. Other models in the range differ slightly by the amount of upholstery and steel they carry.
Which gas lift should I order?
The standard 150 mm lift for an ordinary desk — it gives a seat height of 40–55 cm, which suits desks from roughly 68 to 80 cm. The 200 mm lift (47.5–66 cm) for high or sit-stand desks used seated at their upper setting. The 265 mm lift for counter-height work, best ordered with glides and a HÅG FootRing. The lift is awkward to change afterwards, so decide at order time.
Does the 6004 come assembled?
No — it arrives flat-packed and goes together in a few minutes without tools beyond what is in the box. The ESD version is the exception: it ships fully assembled.
Can the 6004 be certified to EN 1335 class Ax?
No. The 6004 is EN 1335 Type A. Class Ax is reachable on the 6006 only, and only when it is ordered with the SHORT seat and 3D arm pads together. If a tender names class Ax, specify the 6006.

