User Guide - HÅG Capisco®

Download the HAG Capisco User Guide


Height adjustment

hag capisco adjusting the seat height


Seat depth adjustment

hag capisco seat depth adjustment


Height of backrest adjustment

hag capisco adjusting the back rest height


Tilt mechanism lock/unlock

Note: To engage the lock mechanism, it is necessary to lean back slightly while seated on the chair.


Reverse seating guideline / Resistance of tilt adjustment


Head rest (HAG Capisco 8107 only)

Keep your chair free from dust and dirt. Clean the upholstered parts with a damp or dry cloth. Do not remove any covers or try to open the seat mechanism. If technical maintenance is needed, or if the gas lift needs to be replaced or repaired - contact your HÅG dealer or HÅG service personnel. Make sure that you have chosen the right castors for the floor surface where you intend to use the chair (castors with hard wheels for carpeted floors and castors with soft wheels for hard floor coverings). The chair has been tested with appropriate castors so that the unloaded chair will not roll unintentionally. All five castors must be of the same type.

Extended Details

Adjusting the Backrest Height

how to adjust the backrest on a hag capisco

You can adjust the backrest while seated or standing behind the chair.

  1. Locate the knob on the backrest support. 
  2. Pull the knob straight outward. 
  3. While holding the knob, move the backrest up or down to the desired height.
  4. Release the knob to lock the backrest in place.
  5. Gently press against the backrest to ensure it is securely locked. 

Tip: For optimal comfort, the backrest should support the natural curve of your spine. If the backrest does not move, make sure the knob is fully pulled outward before adjusting.